Functional Description; Intended Use; Product Features; Technical Data - Bosch GBH Professional 5-38 D Notice Originale

All manuals and user guides at all-guides.com
OBJ_BUCH-436-001.book Page 8 Friday, July 13, 2007 11:42 AM
8 | English
Always wait until the power tool has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Do not use the power tool with a damaged
cord. Do not touch the damaged cord and
pull the plug from the outlet when the cord
is damaged while working. Damaged cords
increase the risk of an electric shock.

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
While reading the operating instructions, unfold
the graphics page for the tool and leave it open.

Technical Data

Rotary Hammer
Article number
Rated power input
Rated speed
Impact rate
Impact energy per stroke at output/rated power
Chisel positions
Chiselling capacity in concrete of medium hardness
Tool holder
Lubrication
Max. drilling dia.
– Concrete (with twist drill)
– Concrete (with break-through drill bit)
– Brickwork (with core bit)
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltages and models for specific coun-
tries, these values can vary.
Please observe the article number on the type plate of your power tool. The trade names of individual tools may
vary.
1 619 929 752 | (13.7.07)

Intended Use

The machine is intended for hammer drilling in
concrete, brick and stone as well as for chisel-
ling.

Product Features

The numbering of the product features refers to
the illustration of the power tool on the graphics
page.
1 Dust protection cap
2 Locking sleeve
3 Mode selector switch
4 On/Off switch
5 Auxiliary handle
Illustrated or described accessories are not included
as standard delivery.
GBH 5-38 D
Professional
0 611 240 0..
W 1050
rpm 320
bpm 2900
J 7/9
12
kg/h 110
SDS-max
Oil lubrication
mm 38
mm 55
mm 90
kg 5.8
/ II
GBH 5-38 X
Professional
0 611 240 9..
1050
320
2900
7/9
12
110
Hex
Oil lubrication
38
55
90
5.8
/ II
Bosch Power Tools