Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Specifications

AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
Amplifier section
Stereo mode
Surround mode
* Depending on the sound field settings and the source, there may be no sound output.
Inputs (Analog)
Inputs (Digital)
Outputs (Analog)
Outputs (Digital)
SACD/DVD system
Laser
Frequency response (at 2 CH STEREO mode)
Signal-to-noise ratio
Harmonic distortion
FM tuner section
System
Tuning range
Antenna
Antenna terminals
Intermediate frequency
AM tuner section
System
Tuning range
Antenna
US
78
With 4 ohm loads, both channels driven, from 120 – 10,000 Hz; rated
70 watts per channel minimum RMS power, with no more than 10 %
total harmonic distortion from 250 milliwatts to rated output.
70 W + 70 W (4 ohms at 1 kHz, THD 10 %)
Front: 70 W + 70 W
Center*: 70 W
Rear*: 70 W + 70 W (4 ohms at 1 kHz, THD 10 %)
Subwoofer*: 100 W (3 ohms at 100 Hz, THD 10 %)
VIDEO 1, 2:
Sensitivity: 150 mV
Impedance: 50 kilohms
VIDEO 2 (optical):
Sensitivity: –
VIDEO 1 (AUDIO OUT):
Voltage: 2 V
Impedance: 1 kilohms
PHONES:
Accepts low- and high-impedance headphones
DIGITAL OUT (CD)
Sensitivity: –
Semiconductor laser
(SACD: λ = 650 nm)
(CD: λ = 780 nm)
Emission duration: continuous
DVD (PCM): 2 Hz to 22 kHz (±1.0 dB)
CD: 2 Hz to 20 kHz (±1.0 dB)
More than 80 dB (VIDEO 1 (AUDIO) connectors only)
Less than 0.03 %
PLL quartz-locked digital synthesizer system
87.5 – 108.0 MHz (100 kHz step)
FM wire antenna
75 ohms, unbalanced
10.7 MHz
Tuner section:
PLL quartz-locked digital synthesizer system
530 – 1,710 kHz (with the interval set at 10 kHz)
531 – 1,710 kHz (with the interval set at 9 kHz)
Loop antenna

Publicité

Chapitres

Table des Matières
loading

Table des Matières