Step 3: Tv And Video Component Hookups - Sony DAV-C900 Mode D'emploi

Step 3: TV and Video Component Hookups

Required cords
Video cord for connecting a TV monitor
Yellow
Audio/video cords (not supplied)
When connecting a cord, be sure to match the color-coded pins to the appropriate jacks on the
components.
Yellow (Video)
White (L/audio)
Red (R/audio)
Jacks for connecting video components
Connect a
TV monitor
VCR
Digital satellite receiver
z
When using the S-video jack instead of the video jacks
Your TV monitor must also be connected via an S-video jack. S-video signals are on a separate bus from the video
signals and will not be output through the video jacks.
z
When you are connecting the monitor, projector, or AV amplifier (receiver) having component
video input jacks (Y, P
B
Connect the component via the COMPONENT VIDEO OUT jacks using a component video cord (not supplied) or
three video cords (not supplied) of the same kind and length. You will enjoy accurate color reproduction and high
quality images.
Notes
• When you select VIDEO 1 using the FUNCTION button, the signal is output from the front L/R speakers, but not
from the VIDEO 1 VIDEO OUT and AUDIO OUT L/R jacks.
• When you use the Video 1 line outputs, please set the unit to 2CH STEREO mode. If the unit is not in 2CH
STEREO mode, the line outputs may not function properly.
To the
MONITOR OUT jack
VIDEO 1 jacks
VIDEO 2 jacks
, P )
R
Yellow
Yellow (Video)
White (L/audio)
Red (R/audio)
continued
US
23