JVC KS-FX722R Manuel D'instructions page 19

Setting the clock
You can also set the clock system to either 24 hours
or 12 hours.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 20.)
2
Set the hour.
1 Select "CLOCK H" if not shown on the
display.
2 Adjust the hour.
1
3
Set the minute.
1 Select "CLOCK M."
2 Adjust the minute.
1
4
Set the clock system.
1 Select "24H/12H."
2 Select "24H" or "12H."
1
5
Press SEL (select) to finish the setting.
To check the current clock time while the unit
is turned off, press DISP (display).
The power turns on, the clock time is shown for
5 seconds, then the power turns off.
All manuals and user guides at all-guides.com
OTHER MAIN FUNCTIONS
2
2
2
To check the current clock time or change the
display mode
Press DISP repeatedly. Each time you press the
button, the display mode changes as follows:
• During tuner operation:
Clock Frequency
Notes:
* For the indication change during RDS operation,
see page 12.
* For the indication change during DAB operation,
see page 27.
• During tape operation:
Play mode (tape direction)
• During external component operation:
LINE IN Clock
• During CD changer operation:
Clock Elapsed playing time Disc number
Changing the general settings
(PSM)
You can change the items listed on the next page
by using the PSM (Preferred Setting Mode) control.
Basic Procedure
1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 20.)
2
Select the PSM item you want to
adjust. (See page 20.)
CONTINUED ON THE NEXT PAGE
Clock
19