Publicité
Les langues disponibles
Les langues disponibles
SERVICE PROCEDURES
WARNING: To avoid risk of
burn and electrical shock, never
attempt to service heater while it
is plugged in, operating, or hot.
UPPER SHELL REMOVAL
1. Remove screws along each side of heater using
5/16" nut-driver. These screws attach upper
and lower shells together. See Figure 7 or 8.
2. Lift upper shell off.
3. Remove fan guard.
Figure 7 - Upper Shell Removal
(40/55T/70T Models Only)
Screw
Figure 8 - Upper Shell Removal
(115T/165T Models Only)
111168-01A
Screw
Upper Shell
Fan Guard
Upper Shell
Fan Guard
www.desatech.com
Figure 9 - Fan, Motor Shaft, and
Setscrew Location
Setscrew
Motor
Motor Shaft
Figure 10 - Fan Cross Section
Fan
Flush
9
Publicité
