Publicité
Les langues disponibles
Les langues disponibles
STORING, TRANSPORTING,
OR SHIPPING
Note: If shipping, transport companies require
fuel tanks to be empty.
1. Drain fuel tank.
Note: Some models have drain plug on un-
derside of fuel tank. If so, remove drain plug
to drain all fuel. If heater does not have drain
plug, drain fuel through fuel cap opening. Be
sure all fuel is removed.
2. Replace drain plug if provided.
PREVENTATIVE MAINTENANCE SCHEDULE
WARNING: To avoid risk of burn and electrical shock, never at-
tempt to service heater while it is plugged in, operating, or hot.
Item
Fuel tank
Air output and lint filters
Air intake filter
Fuel filter
Ignitor
Fan blades
Motor
111168-01A
How Often
Flush every 150-200 hours
of operation or as needed
Replace every 500 hours of
operation or once a year
Wash and dry with soap and
water every 500 hours of
operation or replace as needed
Clean twice a heating season
or replace as needed
None required
Clean every season or
as needed
Not required/permanently
lubricated
www.desatech.com
3. If any debris is noted in old fuel, add 1 or 2
quarts of clean kerosene to tank, stir, and drain
again. This will prevent excess debris from
clogging filters during future use.
4. Replace fuel cap or drain plug. Properly dis-
pose of old and dirty fuel. Check with local
automotive service stations that recycle oil.
5. If storing, store heater in dry place. Make sure
storage place is free of dust and corrosive
fumes.
IMPORTANT: Do not store kerosene over summer
months for use during next heating season. Using
old fuel could damage heater.
How To
See Storing, Transporting, or
Shipping
See Air Output, Air Intake,
and Lint Filters, page 10
See Air Output, Air Intake,
and Lint Filters, page 10
See Fuel Filter, page 11
See Fan, page 9
7
Publicité
