Publicité
Les langues disponibles
Les langues disponibles
17. Hook the winch line to the loop on the termination strap.
See Figure 12.
18. Connect the vehicle and winch positive and negative
battery cables to the battery; connect the positive lead
first. Test winch operation make sure winch is functioning
properly. Refer to Guide to Winching for proper operating
procedures.
WARNING
Failure to perform regular inspections and main-
tenance on the winch, winch mount, and related
hardware may result in vehicle damage and operator
injury or death.
•
Inspect all metal parts on the winch, winch mount, and related hardware. Replace all that appears rusted or deformed
prior to use.
•
Inspect all nuts and bolts on the winch, winch mount, and related hardware prior to each use. Tighten all nuts and bolts
that appear to be loose. Stripped, fractured, or bent bolts or nuts need to be replaced.
CARELESS INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY OR EQUIPMENT DAMAGE. READ AND UNDERSTAND ALL
SAFETY PRECAUTIONS AND OPERATING INSTRUCTIONS BEFORE INSTALLING AND OPERATING THIS PRODUCT.
©2011 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
M A I N T E N A N C E / C A R E
8
B12
Loop of strap
Figure 12
Figure 13
85689A2
Publicité
