14. Attach the push tube bracket (A3) to the plow blade
assembly. The hardware for attaching the push tube
assembly to the plow blade assembly will be found in the
hardware kit that came with the plow blade, see figure 10.
15. Reinstall the plastic fascia and bumper guard removed in
steps 2 and 3.
16. Use Connect the termination strap to the front bumper. The
loop of the strap should be place as high as possible on the
bumper. See Figure 11. See Figure 13 when connecting to
a WARN front brush guard.
©2011 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
I N S T A L L A T I O N I N S T R U C T I O N S
7
A3
A3
Figure 10
Figure 11
85689A2