ETI EV PLUS Serie Manuel D'installation page 24

7.1.3 LED indicators (AREA2)
The LED indicators give real time information about the charger status. Four different indicators
are available with the functions explained in the following table:
LED indicator
February 2023
Application
WiFi network Depending on its colour and on its behaviour
mode and status (blinking or steady) it gives the following
different information:
Status
Steady
Blinking
Steady
Blinking
Steady
Plug status Depending on its colour and on its behaviour
(blinking or steady) it gives the following
different information:
Status
Steady
Off
Charging process Depending on its colour and on its behaviour
(blinking or steady) it gives the following
different information:
Status
Steady
Blinking
Off
Fault indication Depending on its colour and on its behaviour
(blinking or steady) it gives the following
different information:
Status
Steady
Off
Description
Colour Information
Blue WiFi in AP mode, no
device connected
Blue WiFi in AP
devices are connected
Green WiFi in client mode, not
connected
Green WiFi in client mode,
connected
Red Damaged WiFi module
Colour Information
White The EV is connected
and ready to start
charging
No EV connected
Colour Information
White The charging process is
in progress
White The charging process is
temporarily suspended
No charging process in
progress
Colour Information
Red A fault occurred
No fault
mode,
22