ETI EV PLUS Serie Manuel D'installation page 21

7 Operations
After the charger is installed, it is ready for charging the EVs. The following describes the
operating elements and the display/indicators elements of the charger.
7.1 Operating elements
7.1.1 Display Areas
The charger has three display areas AREA1, AREA2, AREA3 on its front side
Each AREA has its own function as in the following table:
Display
Area
AREA1 Digital character display
AREA2 LED indicators
AREA3 Tap RFID card area prompt light
February 2023
Type
It displays the following information:
They give real time information about:
The four square corners of the RFID card tap area are highlighted
to show where the RFID card should be active
Function description
•
Main network voltage
•
Main network frequency
•
Station number
•
Output current (only during the charging process)
•
Error code
•
WiFi mode and status
•
Charger connection to the EV
•
Charging process
•
Errors
19