Télécharger Imprimer la page

JVC UX-G50 Manuel D'instructions page 20

Publicité

Les langues disponibles

Les langues disponibles

Changing the Display Brightness
Remote
—DIMMER
ONLY
You can dim the display window.
DIMMER
Setting the Clock
Without setting the built-in clock, you cannot use the Daily
Timer (see page 21).
• To exit from the clock setting, press CLOCK/TIMER as
required.
• To go back to the previous step, press CANCEL.
1
Activate the clock setting mode.
CLOCK
/TIMER
• If you have already adjusted the clock before, press the
button repeatedly until the clock setting mode (see
page 21) is selected.
2
Adjust the hour.
PRESET UP
PRESET DOWN
3
Adjust the minute.
PRESET UP
PRESET DOWN
"CLOCK OK" appears and the built-in clock starts
working.
To check the current time during play
DISPLAY
Source information
If there is a power failure
The clock loses the setting and is reset to "AM 12:00." You
need to set the clock again.
DIM ON
DIM OFF
(Canceled)
Remote
ONLY
SET/RESUME
SET/RESUME
Clock
16

Publicité

loading

Ce manuel est également adapté pour:

Ca-uxg50Sp-uxg50