Beko CN163223DE Manuel D'utilisation page 14

5 Using your appliance
1. Fridge compartment temperature setting button
Press this button to set the temperature of the
fridge compartment to 8, 7,6, 5,4,3, 2, 8...
respectively. Press this button to set the fridge
compartment temperature to the desired value.
2. Key lock button
Pressing and holding this button for 3 seconds
will activate the key lock function and the key lock
indicator will turn on. Pressing and holding this
button again for 3 seconds will deactivate the key
lock function.
3. Freezer compartment temperature setting button
Press this button to set the temperature of the
freezer compartment to -18,-19,-20,-21, -22,
-23,-24, -18... respectively. Press this button to
set the freezer compartment temperature to the
desired value.
4. Error status indicator
If your product does not perform enough cooling or
in case of a sensor fault, this indicator is activated.
When this indicator is activated, "E" is displayed
on the freezer compartment temperature indicator,
and numbers such as "1,2,3..." are displayed on
the fridge compartment temperature indicator. The
numbers on the indicator inform service personnel
about the error.
C
When you place hot food into the freezer
compartment or if you leave the door open
for a long time, an exclamation mark can
be displayed for some time. This is not a
failure; this warning will disappear when
the food cools down.
5. Key lock indicator
Use this function if you want to prevent
changing of the temperature setting of the
product. To activate it press and hold fridge
compartment temperature setting button and
freezer compartment temperature setting button
simultaneously for 3 seconds.
6. Eco extra function ındicator
Indicates that the Eco Extra function is active.
Refrigerator / User manual
If this function is active, your product will
automatically detect the least usage periods and
energy-efficient cooling will be performed during
those times.
C
Economy indicator will be active while
energy-efficient cooling is performed.
C
Press the relevant button to disable the
function.
7. Eco extra / Vacation button
Pressing this button briefly will activate the Eco
Extra function. Pressing and holding this button
for 3 seconds will activate the Vacation function.
Pressing this button again will deactivate the
selected function.
8. Vacation function indicator
Indicates that the Vacation Function is active.
When this function is active "- -" appears on the
Fridge Compartment Temperature indicator and no
cooling is performed in the fridge compartment.
Other compartments will be cooled in accordance
with the temperature set for them.
C
Press the relevant button to disable the
function.
9. Icematic off indicator
Indicates whether the icematic is on or off. If On,
then the icematic is not operating. To operate the
icematic again press and hold the On-Off button
for 3 seconds.
C
Water flow from water tank will stop when
this function is selected. However, ice
made previously can be taken from the
icematic.
13 /32 EN