Solarc e.GO! MASTER Manuel D'utilisation Et Informations Techniques page 9

Universal battery charger e.
Operating instructions and technical information
Hello!
We congratulate for purchasing of the novel Universal battery charger e.
quality mains operated device till now with the advantages of a solar powered, energy self-sufficient charge and supply device. We haven't equipped
e. GO! only with state-of-the-art solar cell technology, patented electronic circuits and charge methods, we also have put our back into it regarding
design and quality. Because our aim was and is a pioneering product for people of today with a view of a lasting world of tomorrow. e.
like all products of SOLARC for all of us from regenerative energy sources vitally necessary way to the self-sufficient energy supply. With a e.
at a sunny window at permanent use in Munich, Paris or London up to 300 NiMH batteries can be charged with 2000 mAh or the same number alkali
manganese primary batteries can be saved within a year charged. However, this is only one of the various applications of e.
following instructions before putting into operation to get to know e.
GO!
We wish you a lot of fun with your e.
Overview Functions and versions
GO!
e. is a universal battery charger with mains or solar power supply for the operating and for the charging of electrical devices with max. 4 watts of
operating or charging power. A folding case has 1 or 2 frontal solar modules and one rear, shaded base unit. In this electronics and the battery case
are arranged for 2 to 4 removable AA batteries or 1 to 2 Li-Ion batteries (only PROFESSIONAL version). The solar modules click in in 60° position, an
operation is possible in 60° as well as 30° angles to the ground.
Solar modules and base unity are connected through a unique contact hinge connection at e.
FUN on the version MASTER by putting the lid module on. The single or double module also can as well be removed completely and connected with the
base unit through an optional cable adapter. E.g. this is then packed into the backpack while the solar module simply is fastened to the backpack on the
outside.
GO!
e. as well indoor can be placed at the window or simply operated as an intelligent net battery charger besides use as a mobile outdoor solar charger
for globetrotters, bikers, mountaineers, glider pilots, boat owners like also for PROFESSIONAL users like armed forces, mountain rescue service etc..
For the communication with the outside world e.
1 initial socket for DC sources, e.g. mains adapter or further solar modules
1 output jack for the operation of devices via special adapter cables
5 LEDs for display of capacity, charge and discharge
1 switch for the choice of the output power.
Battery case
DC input
socket
LED-display
e.GO! FUN und MASTER in detail
GO!
GO!
GO!
and avoid problems.
now.
GO!
is equipped with the following components:
hinge safeguard
baffle
GO!
e. FUN
9
It combines functions for you which either could be found only in a high-
GO!
. Through this a fast change is possible of the version
Top cover solar
module
Output port
Switch
position
1 2 3
Base unit
06/2005
GO!
follows this
GO!
MASTER
GO! -- therefore read the
Base solar module