Operating Modes - Solarc e.GO! MASTER Manuel D'utilisation Et Informations Techniques

2. Charging + operating via the solar modules
Adjust e. GO! in angle 30°, 45°, 60° fort
he best position to the sun.
LED5 (green) shines:
GO!
Batteries in e. are being
Charged or
LED4 (red) + LED5 (green) shines:
External device (if connected) is
supplied.
Note: Adjust solar modules as exactly as possible to the sun, place e.
batteries from on-heating particularly!
3. Charge + operating via mains adapter
Insert plug in DC input socket og e.
LED5 (green) shines:
GO!
Batteries in e. are being charged.
LED4 (red) + LED5 (green) shines:
External device (if connected) is
supplied.
Note: Only use original mains adapters, only attach to appropriate mains outlets (see technical data).
4. Operating external device
Adjust output power through switch
(1=1,3 W / 2=2,5 W / 3=4,0 W), connect
external device through adapter cable.
LED4 (red) shines:
External device is supplied.
Note: Attach only external devices in accordance with devices list, follow operating notes and polarity of the device in question, choose output power for
an optimal efficiency as low as possible before. An external device can be operated also directly without buffer batteries. After completion of the
operation of the external device remove adapter cable from e.

5. Operating modes

With AA batteries:
Charge mode 1
: starts after inserting the batteries automatically with max. 1 A of charging current per battery. The charge condition display LED1-3 can
show depending on battery type considerable deviations. The batteries are charged 100% in every case.
Charge mode 2
: starts automatically after inserting of completely discharged batteries, or alternatively
after discharging of the batteries by connection of an external device via the adapter cable,
pulling the adapter cable out then,
and then connection to mains adapter + mains supply.
Charge with 500 mA charging current per battery string. Charge condition display LED1-3 same as charge mode 1.
Charge mode 3
: starts automatically after being fully charged in charge mode 2.
Exact supervision of all charging and discharging events at a max. 1 A of charging current per battery, very exact charge condition display LED1-3. After
removal of the batteries again charge mode 1 or 2.
30°
GO!
in the sun only with modules opened up or else in the shade, protect base unit and
GO!
.
Main adapter
GO!
or else increased internal battery current consumption!
45°
11
60°