The Heat Setting; Powerboost; Child Safety Device; Power Management - Electrolux LIT60320C Notice D'utilisation

Heat setting
, 1 - 2
3 - 4
5
6 - 9
5.3 Selecting the cooking zone
To select a cooking zone touch the sensor
field corresponding to this zone. The
display shows the heat setting (

5.4 The heat setting

Set the cooking zone.
Touch to increase the heat setting. Touch
to decrease the heat setting. Touch
and at the same time to deactivate the
cooking zone.

5.5 PowerBoost

This function makes more power available to
the induction cooking zones. The function
can be activated for the induction cooking
zone only for a limited period of time. After
this time the induction cooking zone
automatically sets back to the highest heat
setting.
Refer to "Technical data"
chapter.
To activate the function for a cooking
zone: first set the cooking zone and than set
the maximum heat setting. Touch
comes on.
To deactivate the function: touch
5.6 Lock
You can lock the control panel while cooking
zones operate. It prevents an accidental
change of the heat setting.
Set the heat setting first.
The hob deactivates
after
6 hours
5 hours
4 hours
1.5 hour
).
until
.
To activate the function: touch
comes on for 4 seconds.
To deactivate the function: touch
previous heat setting comes on.
When you deactivate the hob,
you also deactivate this function.

5.7 Child Safety Device

This function prevents an accidental
operation of the hob.
To activate the function: activate the hob
with . Do not set any heat setting. Touch
for 4 seconds.
the hob with .
To deactivate the function: activate the hob
with . Do not set any heat setting. Touch
for 4 seconds.
the hob with .
To override the function for only one
cooking time: activate the hob with
comes on. Touch
heat setting in 10 seconds. You can
operate the hob. When you deactivate the
hob with the function operates again.

5.8 Power management

If multiple zones are active and the
consumed power exceeds the limitation of
the power supply, this function divides the
available power between all cooking zones.
The hob controls heat settings to protect the
fuses of the house installation.
• Cooking zones are grouped according to
the location and number of the phases in
the hob. Each phase has a maximum
electricity loading. If the hob reaches the
limit of maximum available power within
one phase, the power of the cooking
zones will be automatically reduced.
• The heat setting of the cooking zone
selected last is always prioritised. The
remaining power will be divided between
the previously activated cooking zones in
reverse order of selection.
.
. The
comes on. Deactivate
comes on. Deactivate
.
for 4 seconds. Set the
ENGLISH 11