Installation; Connection Cable; Before The Installation - Electrolux LIT60320C Notice D'utilisation

3. INSTALLATION

WARNING!
Refer to Safety chapters.

3.1 Before the installation

Before you install the hob, write down the
information below from the rating plate. The
rating plate is on the bottom of the hob.
Serial number ...........................
3.2 Built-in hobs
Only use the built-in hobs after you assemble
the hob into correct built-in units and work
surfaces that align to the standards.
3.4 Connection diagram
220V-240V
220V-240V
Insert the shunts
3.5 Assembly
If you install the hob under a hood, please
see the installation instructions of the hood
for the minimum distance between the
appliances.
400V 2N
L1 L2
N PE
220V-240V
between the screws as shown.

3.3 Connection cable

• The hob is supplied with a connection
cable.
• To replace the damaged mains cable, use
the cable type: H05V2V2-F which
withstands a temperature of 90 °C or
higher. Contact an Authorised Service
Centre. The connection cable may only be
replaced by a qualified electrician.
220V-240V 1N
L N PE
220V-240V
220V-240V
220V-240V
L L N N PE
ENGLISH 7