Kohler K-1357 Manuel D'installation/Raccordement page 2

16"
(40.6 cm)
2-1/4"
(5.7 cm)
9" (22.9 cm)
3"
(7.6 cm)
1-1/2" OD
Product Information
Applicable product:
3-side integral tile flange – left drain
3-side integral tile flange – right drain
Fixture*:
Bathing well:
Basin area, bottom 42" (106.7 cm) x 20" (50.8 cm)
Basin area, top 51" (129.5 cm) x 24" (61 cm)
Weight 98 lbs (44.5 kg)
To overflow:
Water depth 14" (35.6 cm)
Capacity 60 gal (227 L)
* Approximate measurements for comparison only.
Blower Heater
motor:
300 W
1040134-1-B
60" (152.4 cm)
2-1/2"
1" (2.5 cm)
(6.4 cm)
K-1357-GLA
K-1357-GRA
Voltage Frequency
120 V 60 Hz
21-1/4"
(54 cm)
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Blower motor:
Blower motor is supplied with a 24" (61 cm) grounding-type
plug-in cord.
Notes
Install this product according to the installation guide.
Floor support under product must provide for a minimum of
47 lbs/square foot (229 kg/square meter).
Fixture conforms to ANSI Standard Z124.1.2. All dimensions are
nominal.
Amperage
5 A
2
No change in measurements with drain
shown. (K-7161-AF or K-7161M-AF)
1-1/4"
(3.2 cm)
1/2"
(1.3 cm) R.
Integral Flange Detail
32" (81.3 cm)
20"
(50.8 cm)
120 V, 5 A, 60 Hz
Kohler Co.