Panasonic SC-HTE180 Mode D'emploi page 9

Connecting an HDMI compatible device
You can connect a Blu-ray Disc player or DVD player and
listen to the audio through this system.
HDMI cable
e.g., Blu-ray Disc
player
HDMI
OUT
HDMI standby pass-through
In standby mode, the audio and/or video signal from the
connected device can be sent to the connected TV. No
sound will be output from this system.
3D compatibility
The system can pass through the 3D video signal of a 3D
compatible Blu-ray Disc player to a FULL HD 3D TV.
Note:
Refer to the operating instructions of the device for video and
audio signal output settings.
Connecting other equipment (AUX)
You can connect other equipment such as Blu-ray Disc
players, DVD players, game consoles, set-top boxes,
etc., and listen to the audio through this system.
Audio cable
e.g., Set-top box
Connecting the AC power supply cord
AC power supply cord (supplied)
To AC outlet
Do not use an AC power supply cord from other
equipment.
Conserving power
The system consumes a small amount of power
(Z"Specifications") when it is in standby mode.
Disconnect the power supply cord if you do not use the
system.
9