Bluetooth ® Connection; Pairing A Device - Panasonic SC-HTE180 Mode D'emploi

Bluetooth ® connection
You can connect and play an audio device wirelessly
through Bluetooth ®
Preparation
• Turn on the Bluetooth
the device near the system.
• Press [`] to turn on the system.
█

Pairing a device

1
Press [ ] to select "BLUETOOTH".
If "PAIRING" is shown, continue with step 3.
2
Press and hold [ ] until "PAIRING" is shown.
3
Select "SC-HTE180" from the Bluetooth
the device.
If prompted for a passkey, input "0000".
The device connects with this system automatically
after pairing is complete.
The name of the connected device is shown for a few
seconds.
Note:
•
A device must be paired to connect.
•
You can pair up to 8 devices with this system.
If a 9th device is paired, the device that has not been used
the longest will be replaced.
█
Connecting a paired device
Preparation
If this system is connected to a Bluetooth
disconnect it (Zsee below).
1
Press [ ] to enter Bluetooth
"BLUETOOTH READY" is shown.
2
Select "SC-HTE180" from the Bluetooth
the device.
The name of the connected device is shown for a few
seconds.
Disconnecting a device
Press and hold [ ] until "BLUETOOTH READY" is
shown.
Note:
• The system can only connect to one device at a time.
•
When "BLUETOOTH" is selected as the source, this
system will automatically try to connect to the last
connected device.
• The Bluetooth device will be disconnected when you
®
select another source.
10
.
feature on the device and place
®
® device,
® mode.
█
One-Touch Connection (NFC)
For NFC-compatible Android™ devices only
When you touch an NFC (Near Field
Communication)-compatible Bluetooth
NFC touch-area of this system, this system will
automatically turn on, pair and connect to the Bluetooth
device.
About NFC
NFC (Near Field Communication) is a short-range
wireless technology that allows communication between
NFC enabled devices with a touch.
Preparation
• Download and install the free Android app "Panasonic
Music Streaming" on Google Play™.
• Turn on "NFC" on your device.
menu of
®
1
Start the "Panasonic Music Streaming" app.
The application screen is shown. Follow the
instructions to complete the settings.
Make sure to use the latest version of the app.
2
Touch and hold your device on the NFC touch area
of this system [ ] until the Bluetooth
done.
- The device will beep.
- A pop-up window is shown on the device.
- The name of the connected device is shown on the
system.
Once the registration and connection of the
Bluetooth
from the unit.
3
Start playback on your Bluetooth
Connecting another device
While connected, you can connect to another Bluetooth
device by simply touching and holding it on the NFC
touch area of this system. The previous device will be
disconnected automatically.
® menu of
device is complete, move the device away
®
®
® device on the
®
connection is
®
device.
®