Specifications - Panasonic SC-HTE180 Mode D'emploi

Specifications

█
Amplifier section
RMS output power: Dolby Digital mode
30 W per channel (6 Ω), 1 kHz, 10% THD
Front Ch
Subwoofer Ch
Total RMS Dolby Digital mode power
FTC output power: Dolby Digital mode
Front Ch
Subwoofer Ch
Total FTC Dolby Digital mode power
█
Terminals section
HDAVI Control
This unit supports "HDAVI Control 5" function
HDMI AV input
Input connector
HDMI AV output
Output connector
Digital audio input
Optical digital input
Sampling frequency
Audio format
Dolby Digital, DTS Digital Surround, LPCM
Analog audio input
Audio input
USB port
█
Bluetooth section
®
Version
Class
Supported profiles
Operating frequency
Operation distance
Supported codec
16
60 W per channel (3 Ω),
100 Hz, 10% THD
120 W
16 W per channel (6 Ω),
170 Hz to 20 kHz, 1% THD
28 W per channel (3 Ω),
45 Hz to 170 Hz, 1% THD
Type A (19 pin)
Type A (19 pin)
Optical terminal
32 kHz, 44.1 kHz, 48 kHz
88.2 kHz, 96 kHz (only LPCM)
Pin jack (1 system)
For service use only
Bluetooth ® Ver. 3.0
Class 2
A2DP
2.4 GHz band FH-SS
10 m (33 ft) line of sight
█
Speaker section
Front speaker (built-in)
Type
Speaker unit(s)
Full range
Subwoofer (built-in)
Type
Speaker unit(s)
Woofer
█
60 W General
Power supply
Power consumption
Dimensions (W x H x D)
Mass
Maximum loading weight
Operating temperature range
Operating humidity range
Power consumption in standby mode
(With "BLUETOOTH STANDBY" set to "OFF")
Note:
•
Specifications are subject to change without notice.
Mass (weight) and dimensions are approximate.
•
Total harmonic distortion is measured by the digital
spectrum analyzer.
SBC
1 way, 1 speaker system (bass reflex)
3.8 cm x 9 cm (1½" x 3½") cone type x 2
1 way, 2 speaker system (bass reflex)
8 cm (3 ") cone type x 2
AC 120 V, 60 Hz
700 mm x 60 mm x 365 mm
(27
50.0 kg (110.2 lbs)
(+32°F to +104°F)
20% to 80% RH (no condensation)
0.2 W (approximate)
27 W
" x 2 " x 14 ")
4.5 kg (9.9 lbs)
0°C to +40°C