Sensor Placement; Optional Sensor; Recommendation For Best Wireless Communication - Bresser 7003500 Mode D'emploi

NOTE:
- When batteries are inserted (or reset), the sensor is in synchronization mode, and can be registered to
the console display within the next 5 minutes.
- If you need to re-assign the sensor channel, slide the channel slide switch to the new channel position. For
the new channel number to be effective, press [ RESET ] key on the sensor.
- To avoid the sensor/s and console pairing failure during new console setup, please power up the sensor/s
first, and then press [ RESET ] key on the main unit (no need on sensors).
3.2.2

SENSOR PLACEMENT

When mounting the Thermo-Hygrometer sensor outside, it's recommendable
that the sensor in located at a shaded area, away from direct sunlight and any
heat source, and at a height at or above the console display.
Place a screw on the wall that you wish to hang the sensor on. Hang
the sensor onto the screw by the wall mounting holder. You can also place the
sensor on a table by itself.

3.3 OPTIONAL SENSOR

The weather station works with the following optional sensors:
NO OF CHANNEL
DESCRIPTION
IMAGE

3.4 RECOMMENDATION FOR BEST WIRELESS COMMUNICATION

Effective wireless communication is susceptible to noise interference in the environment, and distance and
barriers between the sensor transmitter and the display console.
1. Electromagnetic interference (EMI) – these may be generated by machinery, appliances, lighting,
dimmers and computers, etc. So please keep your display console 1 or 2 meters away from these items.
2. Radio-frequency interference (RFI) – if you have other devices operating on 868 / 915 / 917 MHz, you
might experience communication intermittent. Please re-located your transmitter or display console to
avoid signal intermittent problem.
3. Distance. Path loss occurs naturally with distance. This device is rated to 100m (300 feet) by line of sight
(in interference free environment and without barriers). However, typically you will get 30m (100 feet)
maximum in real life installation, which includes passing through barriers.
4. Barriers. Radio signal are blocked by metal barriers such as aluminum cladding. Please align the
Multisensor and display console to get them in clear line of sight through window if you have metal
cladding.
High Precision Thermo-
Hygrometer sensor
7
Soil Moisture and
Temperature Sensor
61
Pool Sensor
EN