Table des Matières
Publicité
Liens rapides
Page 1 of 10
DG0034
FITTING INSTRUCTIONS FOR DG0034 DOWNPIPE GRILLE
FOR HONDA CBR 500R 2019-
PICTURE A
T
.
HIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED OVER PAGE
S
.
OME PARTS MAY BE SHOWN FOR CLARITY OF INSTRUCTIONS ONLY
D
.
O NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT
P
.
LEASE READ ALL INSTRUCTIONS BEFORE PROCEEDING
IF IN ANY DOUBT WHEN FITTING OUR PRODUCTS, CONSULT ONE OF
OUR DEALERS OR HAVE FITTED BY A QUALIFIED TECHNICIAN.
P
LEASE NOTE THAT THE WAY THE KIT IS PACKED DOES NOT NECESSARILY REPRESENT THE
.
WAY OF MOUNTING TO THE BIKE
I
,
N THE EVENT OF RUBBER WASHERS BEING USED TO HOLD COMPONENTS ONTO BOLTS
.
THESE RUBBER WASHERS CAN BE THROWN AWAY
DIGITAL COPIES OF THESE INSTRUCTIONS ARE AVAILABLE FROM:
WWW.RG-RACING.COM
R&G
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
www.rg-racing.com
Email:
info@rg-racing.com
Publicité
Table des Matières
Manuels Connexes pour R&G DG0034
Sommaire des Matières pour R&G DG0034
- Page 1 Page 1 of 10 DG0034 FITTING INSTRUCTIONS FOR DG0034 DOWNPIPE GRILLE FOR HONDA CBR 500R 2019- PICTURE A HIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED OVER PAGE OME PARTS MAY BE SHOWN FOR CLARITY OF INSTRUCTIONS ONLY O NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT...
-
Page 2: Tools Required
M8 BOLT = 20Nm 0 BOLT = 40Nm M12 BOLT = 40Nm LEGEND ITEM NO. DESCRIPTION ITEM 1 DOWNPIPE GRILLE (DG0034) ITEM 2 M6 x 35 LONG BUTTON HEAD BOLTS ITEM 3 M6 NYLOC NUTS ITEM 4 M6 WASHERS ITEM 5 M6 x 15 LONG BUTTON HEAD BOLT R&G... - Page 3 Page 3 of 10 DG0034 PICTURE 1 PICTURE 2 PICTURE 3 PICTURE 4 PICTURE 5 PICTURE 6 R&G Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com...
- Page 4 Page 4 of 10 DG0034 PICTURE 7 PICTURE 8 PICTURE 9 PICTURE 10 PICTURE 11 PICTURE 12 R&G Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com...
- Page 5 Page 5 of 10 DG0034 PICTURE 13 PICTURE 14 PICTURE 15 PICTURE 16 PICTURE 17 PICTURE 18 R&G Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com...
-
Page 6: Fitting Instructions
Page 6 of 10 DG0034 FITTING INSTRUCTIONS Near side (left side as you sit on the motorcycle) • Remove the three push rivets arrowed in pictures 1 and 2. • Remove the two bolts arrowed in pictures 3 and 4. - Page 7 Page 7 of 10 DG0034 R&G RETURNS POLICY (NON-FAULTY GOODS) Returns must be pre-authorised (if not pre-authorised the return will be rejected). Goods may only be returned direct to us if they were purchased direct from us (customer must prove if necessary).
- Page 8 Page 8 of 10 DG0034 NOTICE DE MONTAGE POUR DG0034 GRILLE DE PROTECTION COLLECTEURS D’ECHAPPEMENT POUR HONDA CBR 500R 2019- PHOTO A E KIT CONTIENT LES ARTICLES EN PHOTO ET ETIQUETTES SUR LA PAGE LES PARTIES PRESENTÉES PEUVENT ETRE UNIQUEMENT REPRESENTATIVES POUR LA...
-
Page 9: Outils Requis
M6 BOULON = 15N M8 BOULON = 20N M10 BOULON = 40N M12 BOULON = 40N LEGENDE ARTICLE DESCRIPTION ARTICLE 1 GRILLE DE PROTECTION (DG0034) ARTICLE 2 M6 x 35 BOULONS ARTICLE 3 M6 ECROUS ARTICLE 4 M6 RONDELLES ARTICLE 5 M6 x 15 BOULON R&G... -
Page 10: Coté Gauche (Lorsqu'on Est Assis Sur La Moto)
Page 10 of 10 DG0034 NOTICE DE MONTAGE Coté gauche (Lorsqu’on est assis sur la moto) • Retirez les trois rivets repérés par une flèche sur les photos 1 et 2. • Retirez les deux boulons fléchés des photos 3 et 4.