Audio Connection - Opus Technologies DCL20-K Guide D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

C.
CONNECTION

Audio connection

Line / Mass
Micro input 1 :
Type : 3,5 jack
Caractéristic : phantom power
Input 2 :
Type : terminal block
Input type : line / 100V / low impedance
Loop and power connection.
AC/DC connector
5 x 2,1 mm
Micro / Line / Mass
Jack 3,5
Entrée ligne 1 :
Line input 1 :
Type : Bornier
Type : Terminal block
Type d'entrée : Ligne ou micro
Input type : Line or micro
Connexion à vis
Screw connection
DCL20-K : To connect the microphone
provided with the DCL20-K kit, insert
the 3,5 jack in the micro input 1.
DCL20-SA : To connect an audio source
on the DCL20, connect your wire to the
line input 1 on both « Line » and «
Mass » terminal block connectors.
DCL20-TV : To connect your TV on the
DCL20, connect the provided wire in
the line input 1.
Connection to an intercom or a specific
source :
Connect your source on the DCL20
input 2. This input accept following
sources
:
Line,
100V
impedance.
Connect the loop wire on the DCL20 «
loop » input.
Nota : « Loop » input does can be
connected anyway.
Power supply :
Connect the power block provided in
the kit to the « power supply » input.
and
low

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dcl20-saDcl20-tv

Table des Matières