SilverCrest SRK 400 A2 Mode D'emploi page 11

NOTE
►
4) Place the cooking bowl w in the appliance:
5) Now close the lid.
6) Connect the power cable 5 to the socket 8 and insert the mains plug into
7) Switch the appliance on using the On/Off switch 0. The orange control
8) Press down the function selector switch 7 and cook the rice for the amount
9) When the rice is ready:
10) When you have removed the rice, switch the device off at the On/Off switch 0
NOTE
►
CAUTION - PROPERTY DAMAGE!
►
NOTE
►
│ GB │ IE
■ 8
Always prepare at least enough rice so that the when the water is added it
reaches at least the CUP marking "2". Failure to do so could lead to poor
cooking results!
Ensure that...
–
... there is no moisture or rice on the outside of the cooking bowl w –
this will prevent soiling of the cooking area. If necessary, wipe the outside
with a clean cloth.
–
... the cooking bowl w is not skewed or tilted when being placed in the
rice cooker housing. Always insert the cooking bowl w correctly and
precisely into the rice cooker housing. Otherwise, the safety shut-off of
the appliance may trigger and the appliance will not allow itself to be
switched on.
the power socket.
lamp " "6 lights up.
of time specifi ed on the rice packet.
–
If you want to eat the rice immediately, disconnect the plug from the
mains power socket.
–
If you wish to keep the rice warm (max. 2 hours), press the function
selector switch 7 upwards.
and pull the power plug out of the mains power socket.
Some types of easy-cook rice still have to swell after cooking.
Always follow the preparation instructions on the packaging of the rice.
Use only the supplied plastic spoon r to remove the rice. Other spoons
may cause damage to the anti-stick coating of the cooking bowl w.
You can insert the plastic spoon r into the bracket q at the edge of the
rice cooker. This is always ready to hand!
SRK 400 A2