Toro PowerMax Heavy Duty 1028 OHXE Manuel De L'utilisateur page 28

Replacing the Headlight
Replace the headlight assembly (Toro part number 138-0670) when needed.
1. Remove the headlight wire from the back of the headlight (A of
2. Remove the bolt and nut holding the headlight assembly onto the headlight bracket and then remove the
old headlight assembly (B of
3. Secure the new headlight assembly onto the headlight bracket with the previously removed nut and
bolt (C of Figure
4. Insert the headlight wire straight into the back of the headlight until it is securely in place (D of
Figure 46).
46).
Figure
Figure 46
26
46).
Figure 46).
g326789