Atlantis Onepower 700 Mode D'emploi page 24

Connect your computer equipment with sockets of the UPS and pull off the

input power cable of the UPS from the wall receptacle to check if the Green
Line LED is flashing every 10 seconds. Meanwhile, please check if alarm buzzer
is beeping (very 10 seconds).
Try the field working condition by running some application programs on your

computer and repeating step.
Check if the UPS is initiated properly to support continuous operation. Re-

connect the input power cable to the wall receptacle; the UPS will return to
normal status in a few seconds.
Plug the UPS into the wall outlet to charge the UPS for
over 4 hours before using the UPS.
24
ENG