Titan SPEEFLO PowrLiner 850 Notice D'utilisation page 13

9. Turn pump right side up and apply a few drops of Piston
Lube or light household oil between the top nut and piston.
This will prolong the seal life.
10. Install front cover and four (4) screws.
11. Replace Sureflo Valve and install the suction set.
12. Turn on the sprayer by following the procedure in the
"Operation" section of this manual and check for leaks.
Piston/seal
assembly
DO NOT attempt
to remove the seals
from the piston.
O-ring
Sureflo
Valve
assembly
© Titan Tool Inc. All rights reserved.
Top nut
Top seal
(cup down)
Yoke
Washer
Screw
Dowel
Ball guide
Outlet ball
Outlet seat
Outlet valve
Inlet ball
Inlet O-ring
Inlet seat
13 English