Before Initial Use; Ironing Recommendations - DS Produkte YPF-6150 Mode D'emploi

Before Initial Use

CAUTION!
■ Danger of suffocation from plastic fi lms and bags! Keep children and animals away
from the packaging material.
■ Water residues in the water reservoir are attributable to the fact that this device has
been tested and do not constitute a defect.
• Unpack the items supplied and check them for completeness (see the "Items Sup-
plied and Device Overview" chapter) and possible transport damage. If the device,
the mains plug or the mains cable does have damage, do not use the device(!), but
contact our customer service department.
• Before using the device, remove all packaging materials and any labels that may be
on the device and are used for protection during transportation or for advertising.
• Before the iron is used on an item of clothing for the fi rst time, iron over a damp scrap
piece of fabric to remove any possible production residues from the bottom of the iron
(see the "Use" chapter).
• It is essential that you read through the "Ironing Recommendations" chapter before
you fi rst use the device!

Ironing Recommendations

• Check before ironing whether the garment which is to be ironed has a label with
ironing instructions on it and follow them. Otherwise choose the correct temperature
based on the type of fabric. The recommended temperature and steam settings are:
Label
Synthetics (e.g. nylon, viscose), silk,
velvet
Wool
Cotton
Linen
Not suitable for ironing
• Delicate items of clothing should be ironed inside out.
• Sort the items of clothing based on the ironing temperature and start with the gar-
ments which require the lowest temperature. If the temperature on the device is re-
duced, wait a few minutes until the bottom of the iron has cooled down slightly and
then continue ironing.
• For an optimum ironing result, we recommend that you dry-iron the fabric after steam-
ironing it in order to remove the moisture from it.
21
Material
Tempera-
Steam
ture
up to •
No steam
••
•••
Steam
•••
EN