Drainastim Pro UFM001- 1 Manuel D'utilisation page 50

UK
1. When cleaning this unit, please use a towel or a dry cloth. Certain parts that are in
direct contact with the skin can be cleaned and disinfected with alcohol, but do not use
benzene or any other solvent to clean them.
2. The instrument should be stored in a dry environment, free of dust, moisture and heat.
3. If you do not use it for a long time, please remove the batteries from the remote con-
trol.
4. Please do not connect yourself to other devices during use.
5. Please do not sit or stand on the instrument and do not throw or drop it.
6. After use, remove the plug from the power outlet. When the heat has dissipated, pack
the unit in its carrying case.
7. In the event of a malfunction, do not repair the unit yourself. Contact the distributor
or authorized service dealer immediately.
Battery replacement
The remote control operates using a 2025 button battery. The battery lasts greater than
6 months.
Electrode patch replacement
Electrode patches are reusable for between 20 and 30 applications. If the pads begin to
lose their adhesion, rub their surface with a few drops of water.
The Drainastim Pro
The technology used for the remote control sends an infrared signal to the
Pro
device. Infrared is a common and reliable technology in remote control devices. The
signal is a bit-coded, unidirectional and low speed command. The signal tells the mi-
croprocessor of the
trol should be aimed directly at the
The remote control itself does not change the function, but simply communicates com-
Drainastim Pro
mands to the
50
Remote Control
Drainastim Pro
to change the desired functions. The remote con-
Drainastim
device.
MAINTENANCE AND STORAGE
Proo without any obstacles in between.
Drainastim