Drainastim Pro UFM001- 1 Manuel D'utilisation page 39

USE OF FOOT PADS
Time adjustment function
h. Set the number of minutes you want to use the
or automatic mode.
You can use the buttons on the control panel or on the remote control, under the head-
ing "TIME" on both.
Press the "Time" button and the word "Time" will begin to flash, then press "+" or "-" to set
the usage time from 01:00 to 90:00 minutes.
The default duration is 25 minutes. You can set the timer for up to 90 minutes.
Use a muscle electrostimulation intensity that gives you a strong but comfortable muscle
contraction, and be aware that the intensity required may vary from day to day.
It is normal to feel tingling or other sensations in your calf muscles.
If you feel pain or discomfort:
• Remove one or both feet from the footrests to interrupt the stimulation
• Reduce the intensity of muscle stimulation by using the footrest intensity ad-
justment button (+/- button on the control panel) or from the remote control,
before replacing your feet on the
• Press the "SOLE/BODY" button to select "SOLE" (footrests) or "BODY" (TENS
Electrodes), and press "+" or "-" to adjust the muscle stimulation levels when
"SOLE" or " BODY" flashes on the control panel display
Drainastim Pro
does not vibrate.
i. The time display begins counting down in minutes as the
cutes the selected program.
j. When the Drainastim Pro
a long beep.
k. The Drainastim Pro
after the program ends or when the power is turned on.
Drainastim Pro
is stopped, the time displayed (25:00) and you will hear
will turn off automatically if it has not been used for 1 minute
Drainastim Pro in either manual
Drainastim Pro
UK
exe-
39