Drainastim Pro UFM001- 1 Manuel D'utilisation page 38

UK
Automatic mode function
1
2
Manual mode function
38
f. Before starting the experience, you have 2 main functions
on the Drainastim Pro. The "SOLE" function for use of the foot-
rest (legs/ankle/feet) and the "BODY" function for use of the
TENS Electrodes.
We will look first at the most used function, the "SOLE" function
(footrest).
Press the "Auto" button and the machine starts working. Auto
mode is a mix of different programs for ease of use. Press the
"SOLE/BODY" button to select "SOLE" (for use of the footrest). To
increase the intensity, press the "SOLE/BODY" button to select
"SOLE" (footrest). Once "SOLE" is selected, it will flash and you can
adjust the intensity. The intensity is represented by the number
below SOLE. You can set the muscle electrostimulation intensity
from 1 to 99 (1 being the weakest and 99 the strongest). To ad-
just the intensity when "SOLE" is selected (when it flashes) press
"+" or "-" on the device itself or on your remote control under the
heading "speed".
g. Press "Mode" to enter manual mode, and the display
screen changes from "Auto" to 01", where "01" is the program
number.
Once "01" is selected (it flashes), press "+" or "-" on the device or
on the remote control under the heading "Mode" to choose your
programs (there are 25 in total - Refer to the stimulation programs
at the end of your user manual for details). To increase the intensi-
ty, press the "SOLE/BODY" button to select "SOLE" (footrest). Once
"SOLE" is selected, it will flash and you can adjust the intensity. The
intensity is represented by the number below SOLE. You can set
the muscle stimulation intensity from 1 to 99 (1 being the weak-
est and 99 the strongest). To adjust the intensity when "SOLE" is
selected (when it flashes) press "+" or "-" on the device itself or on
your remote control under the heading "speed".
USE OF FOOT PADS