Use Of The Electrostimulation Belt (Optional) - Drainastim Pro UFM001- 1 Manuel D'utilisation

UK
1. Connect the cable clips to the connectors on the belt.
2. For the lower back and the belly, the points of contact are made through the desired
area.
3. For the above areas, first set the intensity to a low or zero level and slowly increase to
the desired level.
4. For best results, you need to make sure that the muscles not only tingle but actually
contract.
5. Press the "+" button to increase the intensity or the "-" button to reduce the intensity
(intensity: 1-99).
Auto mode programs
1. The "Auto" button allows you to access the automatic programs (25 integrated pro-
grams).
2. The "Mode" button allows you to enter manual mode. Press the mode button. The
screen will display "01" for the 1st program. Press the "Mode" button again to pass
through the programs from "01" to "25".
3. In the auto programs, the therapy will go through a series of 25 beneficial settings,
changing automatically every minute. This is the recommended mode.
Setting the duration
1. Default duration: 20 minutes.
2. Press the "Time" button, and when the word "Time" begins to flash in the windows,
press "+" or "-" to increase or decrease the duration.
3. It is recommended that each session be of 20-25 minutes.
Infrared heating
Infrared heating can be used with the stimulation to promote blood circulation on the
soles of your feet. Press the "Infrared heating" button to turn on the heating for the soles
of your feet. Press the "Infrared heating" button again to turn it off.
The benefits of infrared heat
1. Aids the activation of the cells and increase of the oxygen content.
2. Helps improve microcirculation.
3. Promotes blood circulation and helps to improve metabolism.
46

USE OF THE ELECTROSTIMULATION BELT (OPTIONAL)