USE OF BODY PADS
1
2
Automatic mode function
i.
Press the "Auto" button and the machine starts working.
"Auto" mode is a mix of different programs for ease of use.
Press the "SOLE/BODY" button to select "BODY" (for use with THE
TENS electrodes). Once "BODY" has been selected, it will flash and
you can adjust the intensity. Once "BODY" is selected, it will flash
and you can adjust the intensity. The intensity is represented by
the number below BODY. You can set the muscle electrostim-
ulation intensity from 1 to 99 (1 being the weakest and 99 the
strongest). To adjust the intensity when "BODY" is selected (when
it flashes) press "+" or "-" on the device itself or on your remote
control under the heading "speed".
Manual mode function
j.
Press the "Mode" button to enter manual mode, and the
display screen changes from "Auto" to "01", where "01" is the
program number.
Once "01" is selected (it flashes), press "+" or "-" on the device itself
or on the remote control under the heading "Mode" to choose
your programs (there are 25 in total - Refer to the stimulation pro-
grams at the end of your user manual for details). To increase the
intensity, press the "SOLE/BODY" button to select "BODY". Once
"BODY" is selected, it will flash and you can adjust the intensity.
The intensity is represented by the number below BODY. You can
set the muscle electrostimulation intensity from 1 to 99 (1 being
the weakest and 99 the strongest). To adjust the intensity when
"BODY" is selected (when it flashes) press "+" or "-" on the device
itself or on your remote control under the heading "speed".
UK
43