Complete The Installation; Top Assembly - Heath Zenith DUALBRITE sl-4135-bk Mode D'emploi

1. Stuff the wires into the junction box. Make
sure the wires from the fixture go through
the wire path, and no wires get pinched.
Slide the fixture onto the
mounting screws and
tighten nuts.
2. Caulk fixture mounting surface with
silicone weather sealant. You may want
to wait until you have completed the tests
and adjustments on page 6.
3. Install light bulb. See fixture markings for
proper bulb type and wattage.
4. If so equipped, install the fixture top.Secure
with decorative screws.
5. If you will not be installing the optional tail
assembly, install the decorative nut onto
the bottom of the fixture now.
595-5578-10

COMPLETE THE INSTALLATION

Junction
Box

4182 Top Assembly

Optional Assembly
If so equipped, you may install the decorative
tail as shown below.
1. Screw in
extension bar.
Bottom trim piece
has drain hole
5
Larger piece
on top
Hex nut
2. Add tail piece
and trim.
3. Install
decorative nut.