Hilti SFE 2-A12 Notice D'utilisation Originale page 30

The following adapters are available:
Adapter Description
Hex bit holder for bits with mechanical clamping mechanism.
Keyless chuck for sizes in the range:
1.5 mm ... 13 mm
Right-angle adapter for working in cramped conditions, with
magnetic hex bit holder.
Combinable with other adapters.
Eccentric adapter for working close to the wall, with magnetic
hex bit holder.
4 Technical data
4.1 SFE 2-A12
Rated voltage
Weight
Maximum speed
Maximum torque
Drill-bit diameter
Ambient temperature for operation
Storage temperature
4.2 Noise information and vibration values in accordance with EN
62841
The sound pressure and vibration values given in these instructions were
measured in accordance with a standardized test and can be used to
compare one power tool with another.
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However,
if the power tool is used for different applications, with different accessory
tools, or is poorly maintained, the data can vary. This can significantly
increase exposure over the total working period.
26 English
1st gear
2nd gear
Screwdriving 0.5 Nm ... 5 Nm
Drilling
Softwood
Hardwood
Metal
They can also be used for a
2236948
10.8 V
1.1 kg
400 /min
1,600 /min
≤ 21 Nm
1.5 mm ... 13 mm
1.5 mm ... 10 mm
1.5 mm ... 6 mm
−17 ℃ ... 60 ℃
−20 ℃ ... 70 ℃
*2236948*