Publicité
3
Functions and Features
Refresh Hold
The Refresh Hold function allows you to freeze the displayed value. The bar-graph
is not held and will continue to reflect the instantaneous measured value. You can
use the Setup mode to enable Refresh Hold mode when you are working with
fluctuating values. This function will auto trigger or update the held value with a
new measured value and emit a tone as a reminder.
1 Press
2 It will be ready to hold a new measured value once the variation of measured
3 The
4 Press
88
to enter Refresh Hold mode. The present value will be held and
the
symbol will appear.
values exceeds the variation count setting. While the multimeter is waiting for
a new stable value, the character "R" in the
annunciator will stop flashing once the new measured value is
stable and the new value will be updated to the display. The
annunciator will remain on and the multimeter will emit a tone to remind you
of this.
again to disable this function. You may also press
than 1 second to quit the Refresh Hold function.
annunciator will flash.
Keysight U1253B User's and Service Guide
for more
Publicité
