Using The Blender; Important; Blending Tips - Hamilton Beach 51135 Manuel D'utilisation

Using the Blender

IMPORTANT: Your blender jar,
blade, and collar are subject to
wear during normal use. Always
inspect jar and collar for nicks,
chips, or cracks. Check the blade
for breaks, cracks, or chips. If any
parts are damaged, do not use.
Call our toll-free customer service
number to obtain replacement
parts.
4
4
840236001 ENv03.indd 4 840236001 ENv03.indd 4
1
Add ingredients to jar. Carefully
place cutting assembly and collar
onto jar.
5
Remove collar and cutting blade
assembly from jar. Hand-tighten
drinking lid onto jar.
w WARNING Burn Hazard.
Do not blend hot ingredients. Pressure may build, causing jar
to pop off and hot ingredients to erupt.
2
Turn jar upside down and place
onto base.

Blending Tips

• Do not chop or process hard foods such as cheese, crackers, or meat.
• If blending action stops during blending or ingredients stick to sides
of the jar, turn blender OFF. Remove jar, collar, and blade and use a
narrow rubber spatula to stir.
• Do not process hot foods or liquids in blender.
• Avoid bumping or dropping the blender.
• If blender stops working, unplug and allow 15 minutes before using.
Plug into outlet to start blending.
3
Plug into outlet. Press ON/OFF
( ) to pulse or blend 15 to 30
seconds or until smooth. Hold jar
in place while blending. Always
operate on a countertop or other
supporting surface.
12/4/14 3:10 PM 12/4/14 3:10 PM