Using Your Blender; Before First Use; Important - Hamilton Beach 53520C Mode D'emploi

Using Your Blender

IMPORTANT: Your blender jar
and cutting blade assembly are
subject to wear during normal
use. Always inspect jar for nicks,
chips, or cracks. Always inspect
cutting blade assembly for
broken, cracked, or loose blades.
If jar or cutting blade assembly
is damaged, do not use. Call our
toll-free customer service number
to obtain replacement parts.
4
6
1
5
Push the desired speed button.
When using the PULSE buttons,
the blender will only run when
the button is held down.
BEFORE FIRST USE: After unpacking the blender, follow the
instructions in "Cleaning Your Blender."
2
6 – OPTIONAL
3
w WARNING Burn Hazard.
When blending hot liquids,
remove filler-cap and close the
edge cover opening intended
for pouring. To prevent possible
burns: Do not exceed the 3-cup
(710-ml) level. Hot liquids may
push off lid during blending;
therefore, with the protection
of an oven mitt or thick towel,
place one hand on top of the lid,
keep exposed skin away from
the lid, and start blending at
lowest speed.