Detach Soft Goods - Joie i-Spin 360 Mode D'emploi

!
The ISOFIX connectors must be
attached and locked onto the
ISOFIX anchor points.
38
!
The load leg must be installed
correctly with green indicator.
-2
38
Securing Child
1. Press the webbing adjustment
button, while pulling out the
shoulder harnesses to the desired
(Pull from below the fixed
shoulder pads to lengthen) length.
39
2. Unlock the buckle of the harnesses
by pressing the red button.
23
38
-1
1
39
40
40
3. Fix the buckles on the both sides of
the seat shown as
on the both sides of seat to make
placing the child in forward facing
mode more convenient.
2
4. When installing the enhanced child
restraint in the forward facing mode,
do not use the infant insert.
5. Place the child into the enhanced
child restraint and pass both arms
through the harnesses. Engage
the buckle.
!
After the child is seated, recheck
whether the shoulder harnesses
are at the proper height.
6. Pull down the adjustment webbing
and adjust it to the proper length to
make sure your child is properly
secured. 42
!
Always keep child secured in
harness and properly tightened by
removing any slack.

Detach Soft Goods

see images
43
Press the red button to disengage the
buckle.
43
-
Follow steps
44
goods.
To re-attach the soft goods please
repeat the above steps in the reverse
step.
41
41 which located
42
-
49
43
to detach soft
49
24