Joie i-Spin 360 Mode D'emploi page 10

Using in the Rear Facing Mode
(Child height 40cm-105cm/Child weight
19kg/infant - 4 years old)
see images -
21 32
!
Please install the enhanced child
restraint on the rear vehicle seat,
and then put the child in the
enhanced child restraint.
!
Please slide Smart Ride™
lock-off to left when enhanced
child restraint used in rearward
facing mode.
1. Press the ISOFIX adjuster button
-1 and pull the base back from
22
the vehicle seat.
2. Press the rotating button to rotate
for easier side loading/unloading
of the child, then rotate the seat
to the rear facing position.
!
Press the rotating button on either
side to rotate the enhanced child
restraint.
17
21
22
2
1
23
&
23 24
3. After successfully installing the
ISOFIX connectors, press the
ISOFIX adjustment buttons again
while pushing the seat back until
it comes in contact with the
vehicle seat back. -1 -2
25 25
!
The ISOFIX connectors must be
attached and locked onto the
ISOFIX anchor points. -1
26
!
The load leg must be installed
correctly with green indicator.
-2
26
24
25
1
2
26
2
1
18