Service And Contact - resideo R200 Guide D'installation Et De Configuration

12. Specifications
Working voltage
Sensor type
CO measurement range
2
CO measurement error range
2
Pressure dependence
CO measurement resolution and response time
2
Temperature range
Storage environment
Temperature measurement error range
Temperature measurement resolution/response time : 0.1°C /°F; T90 < 120 s
Humidity measurement resolution and response time : 0.1%; T90 < 600 s
Humidity measurement range
Humidity measurement error range
Backup battery running time
Sensor service life
IP Rating
Environmental protection standard
Overall dimensions
Product weight

13. Service and Contact

For questions about the installation, use or operation of this product please visit www.resideo.com
and use the search engine to find more information. Please Note: While every effort has been
made to ensure accuracy in this publication, no responsibility can be accepted for errors or
omissions. Data may change, as well as legislation, and you are strongly advised to obtain copies of
the most recently issued regulations, standards, and guidelines. This publication is not intended to
form the basis of a contract.
: DC5V (Power adapter 5V/1A)
: None-dispersive infrared (NDIR) sensor
: 400 ~ 5000 PPM
: ± 50PPM ± 5%
: + 1.6 % reading per kPa deviation from normal
pressure
: 1 PPM; T90 < 120 s
: Working temperature 10°C ~ 45°C or 50°F ~
113°F
: Working humidity 0 ~ 90% RH (no
condensation)
: Storage temperature -10°C ~ 60°C
: Storage humidity 0 ~ 95% RH (no
condensation)
: ± 0.5 (C) or 0.9 (F)
: 0.0% ~ 99.9%RH
: ± 5% RH
: ~12 Hours
: 10 years
(end of product life: the display shows "End")
: IP40
: EN IEC 63000:2018
: 99 mm x 99 mm x 37 mm
: Net weight 291gr
-7-