resideo R200 Guide D'installation Et De Configuration page 5

7. Explanation operation buttons
8. Recommended actions when the CO
Keep calm.
Open all doors and windows and turn off all combustion appliances.
If the CO Monitor continues to sound the alarm, evacuate your home.
2
Leave all doors and windows open and do not enter until the alarm has stopped.
Seek medical attention for anyone who may be suffering from the effects of carbon dioxide.
Short press for 1 second to switch between temperature, humidity and CO
display.
Short press for 1 second to get temperature display and then long press for 3
seconds to set degrees Celcius or degrees Fahrenheit.
Short press for 1 second to get CO
to set alarm sound ON/OFF.
Long press for 3 seconds to test the alarm.
Short press for 1 second to delay/hush the alarm for 10 minutes.
Within 150 seconds from turning the product on, press and hold both keys
simultaneously for 3 seconds. You will hear a voice message in the currently
selected language. Press again for 3 seconds and the selection moves to the
next available language.
2
-5-
display and then long press for 3 seconds
2
Monitor warning has been activated
2