Samsung RZ32 Serie Mode D'emploi page 56

Maintenance
A: 7 mm
56 English
Untitled-3 56
12
1
A
A
9. Fasten the upper bracket (1).
- Fasten the upper bracket (1) with
the four M5 x L16 hex screws
(12) to secure the top part of the
refrigerators.
NOTE
Align the tops of the refrigerators before
fastening the upper bracket.
10. Check the spacing between the
refrigerators.
- After fastening the upper and lower
brackets, make sure the spacing
between the refrigerators is 7 mm at
the top and bottom.
NOTE
If the spacing between the refrigerators is
greater than 7 mm, there may be less room
between the refrigerator and the cabinet,
and this may interfere when opening the
doors.
11. Push the refrigerators into the cabinet.
- Have two people simultaneously
push the refrigerators, fixed with
brackets, into the cabinet.
NOTE
If the two people do not push the
refrigerators evenly, the rear parts of
the refrigerators may spread out or may
deviate from their intended spot.
12. Adjust the height of the refrigerators.
- Turn the leveling leg right or left to
adjust the height of the refrigerators
to be flush with the cabinet.
2020-11-05 AM 11:50:25