Samsung RZ32 Serie Mode D'emploi page 48

Maintenance
Slim Ice Maker (applicable models only)
NOTE
• When cleaning the component parts of the Slim Ice Maker such as the water bin, ice
bucket, and ice tray, make sure they are completely dry after cleaning.
• When cleaning the Slim Ice Maker unit, make sure to completely dry the inner and outer
parts of the unit after cleaning. Incomplete dryness may cause the ice maker lever to
fail. In this case, dry the Slim Ice Maker completely for 2-3 days. Then, try again.
To remove the parts
48 English
Untitled-3 48
Water bin
Fully open the water bin, and then pull out.
ice tray
1. Open the ice tray cover to reveal the ice
tray.
2. Slightly pull out the left side of the ice
tray, and then pull out the other side to
remove.
2020-11-05 AM 11:50:22