Samsung RZ32 Serie Mode D'emploi page 53

Step-by-step instruction
NOTE
The numbers on the figure and in the parenthesis are the same as those in the accessories
list.
Untitled-3 53
1. Check the level of the floor.
2. Place the A/S jig-sheet refs (08) and
08
07
- Use a level to check the level of the
floor where the refrigerator's two
rear casters will be placed.
check the level.
- Place the two provided A/S jig-sheet
refs (08) on the floor where the
refrigerator's two rear casters will be
placed, and then check the level.
- If the floor is not level, put the
provided level adjustment pads (07)
under the A/S jig-sheet refs (08) so
the refrigerator will stand on a level
surface.
- Once you sort out all the necessary
parts to level, peel off the double-
sided tape on the bottom of each
part and attach the part in its final
position.
English 53
2020-11-05 AM 11:50:24