Honda Power Products HHHE61LE Notice D'utilisation page 23

SIDE CUTTING
EN
When trimming the sides of the hedge, begin at the bottom and cut upwards (see
Fig. 8). Trim the side of a hedge so that it will be slight narrower at the top.
This shape will expose more of the hedge, resulting in a more uniform growth.
8
SAWING FUNCTION
Although the blade gap allow wood to be
9
cut up to Ø 22mm, the tip of the blade
is designed to cut wood up to Ø 26mm
Ø 26mm
(see Fig. 9). If a radical cut is necessary,
cut a little at a time in several stages.
TIP PROTECTOR
The tip protector makes cutting near
the ground or along walls easier while
Ø 22mm
protecting the special cutters from
damage.
23
EN
CORDLESS HEDGE TRIMMER — HHHE61LE