Honda Power Products HHHE61LE Notice D'utilisation page 21

TO START THE HEDGE TRIMMER
Your hedge trimmer is equipped with two switch levers. Both switch levers need to
be pressed for the hedge trimmer to start. Depress and hold the switch lever in the
front handle and press the switch lever in the rear handle to start the hedge trimmer.
TO STOP THE HEDGE TRIMMER
Move hedge trimmer away from cutting area, release one of the switch levers to
stop the hedge trimmer.
WARNING:
Always remove the battery pack from the hedge trimmer during
work breaks and after finishing work.
USING THE HEDGE TRIMMER
WARNING:
If the blade jams on any electrical cord or line, DO NOT TOUCH
THE BLADE! IT CAN BECOME ELECTRICALLY LIVE AND VERY DANGEROUS.
Continue to hold the hedge trimmer by the insulated rear handle or lay it down and
away from you in a safe manner. Disconnect the electrical service to the damaged
line or cord before attempting to free the blade from the line or cord. Failure to heed
this warning will result in serious personal injury or possible death.
WARNING:
If any parts are missing, damaged or broken, do not operate
your trimmer until they have been replaced. Failure to do so could result in possibly
serious personal injury.
WARNING:
To prevent serious personal injury, always use both the front
handle and the rear handle to hold the hedge trimmer during operation.
WARNING:
To prevent serious personal injury, keep hands away from blades.
Do not attempt to remove cut material or hold material to be cut when the blades
are moving. Make sure that the blades have totally stopped and the battery pack is
removed before clearing jammed material from blades. Do not grasp the exposed
cutting blades or cutting edges when picking up or holding the unit.
WARNING:
Clear the area to be cut before each use. Remove all objects,
such as cords, lights, wire, or string which can become entangled in the cutting
blade and create a risk of serious personal injury.
CORDLESS HEDGE TRIMMER — HHHE61LE
EN
21
EN