Télécharger Imprimer la page

HP LaserJet Managed MFP E731 Serie Guide De L'utilisateur page 243

Publicité

Déclaration de conformité de la FCC – Etats-Unis
Exposure to radio frequency radiation
ATTENTION :
limits. Nevertheless, the device shall be used in such a manner that the potential for human contact
during normal operation is minimized.
In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity
to the antenna shall not be less than 20 cm during normal operation.
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
ATTENTION :
this product without the express approval by HP may invalidate its authorized use.
Déclaration pour l'Australie
This device incorporates a radio-transmitting (wireless) device. For protection against radio
transmission exposure, it is recommended that this device be operated no less than 20 cm from the
head, neck, or body.
Brésil : (Portugais)
Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar
interferência em sistemas devidamente autorizados.
Para maiores informações consulte o site da ANATEL –
Déclarations au Canada
For Indoor Use. This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus as set out in the radio interference regulations of the Canadian Department of
Communications. The internal wireless radio complies with RSS 210 of Industry Canada.
Pour l´usage d´intérieur. Le présent appareil numérique n´émet pas de bruits radioélectriques
dépassant les limites applicables aux appareils numériques de Classe B prescribes dans le règlement
sur le brouillage radioélectrique édicté par le Ministère des Communications du Canada. Le composant
RF interne est conforme à la norme CNR-210 d´Industrie Canada.
Produits d'une puissance de 5 GHz - Industrie du Canada
ATTENTION :
operation in the 5. 1 5- to 5.25-GHz frequency range. Industry Canada requires this product to be used
indoors for the frequency range of 5. 1 5 GHz to 5.25 GHz to reduce the potential for harmful interference
to co-channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to
5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or
damage to this device.
Lors de l'utilisation d'un réseau local sans fil IEEE 802. 1 1a, ce produit est réservé à une utilisation en
intérieur en raison de sa plage de fréquences, comprise entre 5, 1 5 et 5,25 GHz. Industrie Canada
recommande l'utilisation en intérieur de ce produit pour la plage de fréquences comprise entre 5, 1 5
et 5,25 GHz afin de réduire les interférences nuisibles potentielles avec les systèmes de satellite
portables utilisant le même canal. Le radar à haute puissance est défini comme étant le principal
232
Annexe C Informations juridiques
The radiated output power of this device is far below the FCC radio frequency exposure
Based on Section 15.21 of the FCC rules, changes of modifications to the operation of
When using IEEE 802. 1 1a wireless LAN, this product is restricted to indoor use, due to its
www.anatel.gov.br

Publicité

loading

Ce manuel est également adapté pour:

Laserjet managed mfp e73130Laserjet managed mfp e73135Laserjet managed mfp e73140Laserjet managed flow mfp e73130Laserjet managed flow mfp e73135Laserjet managed flow mfp e73140