Publicité
Component ---------Summary Description--------- Qty
vlun
Hosts not connected to a port
Component -----Identifier----- ---------Detailed Description--------
vlun
host:cs-wintec-test1 Host wwn:10000000C964121D is not connected
to a port
vlun Mesure suggérée
Vérifiez le statut d'exportation et le statut des ports de VLUN et de HOST à l'aide des commandes de CLI
telles que showvlun, showvlun -pathsum , showhost, showhost pathsum , showport,
servicehost list , etc. Par exemple :
cli% showvlun -host cs-wintec-test1
Active VLUNs
Lun VVName HostName
2 BigVV
-----------------------------------------------------------
1 total
VLUN Templates
Lun VVName HostName
2 BigVV
cli% showhost cs-wintec-test1
Id Name
0 cs-wintec-test1 Generic 10000000C964121D ---
cli% servicehost list
HostName -WWN/iSCSI_Name-
host0
10000000C98EC67A 1:1:2
host1
210100E08B289350 0:5:2
Lun VVName
2
BigVV
vv
Affiche les volumes virtuels (VV) non optimaux. Vérifie les VV et les CPG (Common Provisioning Groups)
dont State n'est pas normal.
Format des messages d'exception de vv possibles
VV vv:<vvname>
VV vv:<vvname>
VV vv:<vvname>
VV vv:<vvname>
VV vv:<vvname>
VV cpg:<cpg>
VV cpg:<cpgname> "CPG growth increment is below threshold"
vv Mesure suggérée
-Host_WWN/iSCSI_Name-
cs-wintec-test1 10000000C964121C
-Host_WWN/iSCSI_Name- Port Type
cs-wintec-test1 ----------------
Persona -WWN/iSCSI_Name- Port
10000000C964121C 2:5:1
Port
HostName
cs-wintec-test1 10000000C964121D
"IO to this volume will fail due to no_stale_ss policy"
"Volume has reached snapshot space allocation limit"
"Volume has reached user space allocation limit"
"VV has expired"
"Detailed State: <state>" (failed or degraded)
"CPG is unable to grow SA (or SD) space"
2:5:1 host
-Host_WWN/iSCSI_Name-
1
Port Type
--- host
Port
Type
3:5:1 unknown
155
vv
Publicité
