Receive Mode; Using Optional Equipment; Cd/Md Changer - Sony CDX-GT700D Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Dimmer
To change the brightness of the display.
– "off": to deactivate the dimmer.
– "Auto" (
): to dim the display automatically
z
when you turn lights on.
– "on": to dim the display.
Auto Scroll
To scroll long displayed item automatically
when the disc/album/group/track is changed.
– "off" (
): to not scroll.
z
– "on": to scroll.

RECEIVE MODE

Local (Local seek mode)
– "off" (
): to tune normal reception.
z
– "on": to only tune into stations with stronger
signals.
Mono (Monaural mode)*
To improve poor FM reception, select monaural
reception mode.
– "off" (
): to hear stereo broadcast in stereo.
z
– "on": to hear stereo broadcasts in monaural.
Regional*
2
To set "off" or "on" (
)(page 10).
z
BTM (page 8)
SOUND
HDEQ (page 13)
DSO 3D (page 14)
I-TA (page 14)
Front HPF (High Pass Filter)
To select the front speaker cut-off frequency:
"off" (
), "63Hz," "78Hz," "100Hz," "125Hz"
z
or "160Hz."
Rear HPF (High Pass Filter)
To select the rear speaker cut-off frequency:
"off" (
), "63Hz," "78Hz," "100Hz," "125Hz"
z
or "160Hz."
LPF (Low Pass Filter)
To select the subwoofer cut-off frequency: "off"
(
), "63Hz," "78Hz," "100Hz," "125Hz" or
z
"160Hz."
Loudness
To allow you to listen clearly at low volume
levels.
– "off" (
): to not reinforce bass and treble.
z
– "on": to reinforce bass and treble.
AUX Level
To adjust the volume level for each connected
auxiliary equipment. This setting negates the
need to adjust the volume level between sources
(page 18).
2
LIST
When the radio or CD/MD changer is used, the
station frequency, or CD/MD number/track
name is displayed.
PTY*
2
You can tune to a station by selecting the desired
programme type.
*1 When the unit is turned off.
*2 When FM is received.

Using optional equipment

CD/MD changer

Selecting the changer
1 Press (SOURCE) repeatedly until "CD" or
"MD" appears.
2 Press (MODE) repeatedly until the desired
changer appears.
Unit number, MP3 indication*
LP2/LP4 indication*
Disc/Album number
Playback starts.
*1 When MP3 is played.
*2 When MDLP disc is played.
Skipping albums and discs
1 During playback, press (GP/ALBM) +/–.
Press (GP/ALBM).
To skip
album
and release (hold for a
moment).
album
within 2 seconds of first
continuously
releasing.
discs
repeatedly.
discs
then, press again within 2
continuously
seconds and hold.
continue to next page t
1
2
17

Publicité

Table des Matières
loading

Table des Matières